• Display • Laser (in units with laser) • Trigger • °C/°F Switch C F • Battery Compartment • Serial Number Label • Wrist Strap Connection • Battery Cover
English Warning (units with laser sighting) Do not point laser directly at eye or indirectly off reflective surfaces.
English How to Operate the Unit A °C/°F and Battery C Pull open the unit’s handle using the finger indents near the trigger to access the C/F switch or to insert/remove the battery. To toggle between °C and °F, push the switch (A). Insert the 9v battery positive side first into the battery compartment. NOTE: The battery door is detachable. F + - 9v Battery Operating the Unit To measure a temperature, point unit at object and pull the trigger.
English How to Accurately Measure Temperature Locating a Hot Spot To find a hot spot aim the thermometer outside the area of interest, then scan across with an up and down motion until you locate the hot spot. Field of View Make sure that the target is larger than the unit’s spot size. The smaller the target, the closer you should be to it. When accuracy is critical, make sure the target is at least twice as large as the spot size.
English Emissivity Most organic materials and painted or oxidized surfaces have an emissivity of 0.95 (pre-set in the unit). Inaccurate readings will result from measuring shiny or polished metal surfaces. To compensate, cover the surface to be measured with masking tape or flat black paint. Allow time for the tape to reach the same temperature as the the material underneath it. Measure the temperature of the tape or painted surface.
English CE Certification This instrument conforms to the following standards: • EN 61326-1 Electromagnetic Emissions and Susceptibility • EN 61010-1 General Safety • EN 60825-1 Laser Safety Between approximately 250Mhz and 800 Mhz at 3V/m, the instrument may not meet its stated accuracy. Warranty Oakton warrants this product to be free from defects in material and workmanship under normal use and service for a period of one year from date of purchase, except as hereinafter provided.