Use and Care Manual

Showing circlip snapped closed

Place the circlip back on using the circlip pliers, you’ll see that once the circlip is in its groove the

two ends will snap together, see the above picture, you will notice that there in now only a small

space between the two eye pieces of the circlip. YOU MUST WEAR SAFTEY GLASSES WHILE

PERFORMING THIS OPERATION AS CIRCLIP MAY FLY UPWARDS OFF PLIERS

Using 11/2" spanner to re-attach insert.

Using a 1½” spanner wind back an insert, make sure that the spigot is in full contact with the back

of the chuck. This is very important for maintaining accuracy. Once the insert is fully engaged

screw in the M6 grub screw with the 3mm Allen key provided.