Congratulations! We congratulate you on your choice of PrimaNOVA Digital Babycall, model GI-D4. This product features digital technology and practical safety functions that ensure you the units are within range. Only non-toxic materials have been used, and there are no detachable parts that could be swallowed. Bear in mind that an electronic baby monitor is not a replacement for parental attention and care; it's a practical aid that makes your day safer.
Parent Unit B1 On/Off button.................. turns the power on or off B2 System indicator.............. indicator lamp: green colour............ connection OK blinking green (+ alarm tone 1)... weak batteries blinking red (+alarm tone 2) ...... out of range B3 Volume control ................ for adjusting volume B4 Channel selector 1/2/3/4.. select the channel with the least noise (same as the baby unit) B5 Adapter contact .............. for connecting the adapter cord B6 Visual sound indicator.....
Battery charging PrimaNOVA has an integrated charge function in both units. Set the switch on the left in the battery compartment to CHA (the up position) and insert the rechargeable batteries correctly following the + and - markings. Plug in the adapters. The batteries should be charged for about 12 hours. The unit can be used during charging, but the time for charging should then be at least 14 hours for a full battery charge. Unplug the adapters after charging.
Bear in mind that radio signals may be blocked in areas where there is radio noise. In such situations sounds from the baby unit might not be heard at times, even though nothing is wrong with the units. This may also occur if another baby unit is placed between your units or close to your parent unit. The range will also be substantially reduced when your batteries are weak. Maintenance Clean the units using a soft and moist cloth. Never immerse the units in water.
▼ Problem Possible cause Solution Interference during transmission. Another baby unit is close by. Switch to another channel and lower sensitivity. Reduce the distance. Place both units vertically and move them a bit. There is nothing much that can be done about local conditions. You might try turning off light dimmers or other sources of electronic noise in the house. The units rarely have defects. Turn on the baby unit. Too great a distance between the units. Local conditions.