Installation Instructions

10
max. 16”
(400mm)
min. 6”
(150mm)
max. 16”
(400mm)
• Fasten each Novabrik on the first
course with two screws.
• Fasten each Novabrik at top of
baseboard with two screws.
• Continue installation in the usual
manner.
• Install ¾” (19mm) plywood as
baseboard, extend plywood
minimum 6” (150mm) above floor.
• Make sure to fasten top of
baseboard to both the sill plate and
studs.
Overhang Section
Limit Novabrik installation to one story on overhanging sections and extending
maximum 16” (400mm) with floor joist spacing 16” (400mm) on center
maximum.
Note: If the overhang is longer than 16” (400mm) or if the wall is higher
than one story, consult a structural engineer.
Starter Strip