Installation Instructions

12
90º Exterior Corner
Step 4
• Continue to install blocks the same way up
to the end of the first corner strip.
• Insert one more block onto the corner strip.
• Slide down second steel corner strip into the
last block.
• Align with bottom strip and fasten to the wall.
Step 5
• Continue up the wall to the end of the last
full length steel corner strip.
• Insert one more block into the corner strip.
Step 6
• Measure the remaining length to top of wall.
• Cut the corner strip accordingly (this step is easier if you make the last
strip 18” (450mm) long or less, repeat step 4 with the shorter corner strip to
approach the top of the wall).
• Fasten the required number of blocks onto the strip, cut the last block to fit
and attach with adhesive.
• Fasten the steel corner strip assembly to the wall.