Installation Instructions

35
Tips
Preparation tips
• When using power equipment, follow safety procedures.
• Predrill all Novabrik Corners and all first row Novabrik that will be screwed into
furring strips.
• To predrill holes in the Novabrik, lay the brick on a flat surface and drill with the
drill bit at a 90° angle to the ground.
Correct Incorrect
• After drilling holes or cutting the Novabrik, brush off any dust or concrete chips
that may remain on the brick.
• Before installing the house wrap, mark down the location of the studs on the
bottom horizontal furring strip to identify the position of the furring strips to
install.
Installation tips
• If the screw does not penetrate the furring strip properly, it is probably because
you have not hit the stud.Move the screw and reinstall.