Installation Instructions

• ½” (13mm) or 9/16” (14mm) hammer

drill (not a rotary SDS hammer drill)

• 3/16” (5mm) and 7/32” (6mm)

masonry drill bits designed for a

hammer drill

• cordless drill

• drivers for drill to match screws

• chop saw with diamond blade or

masonry saw

• level

• rubber hammer

• hand held brush

• measuring tape

• string line for leveling

• utility knife

• skill saw (for wood strips)

• caulking gun

• scaffolding

• hammer

• gloves

• safety glasses

• dust mask

• earplugs

Note on cutting Novabrik

Cutting brick is often a key part of installation. You can use

either a wet saw or a dry saw with diamond blades.

Although a dry saw will be easier to move around. A wet saw

will reduce dust while cutting. Thoroughly rinse with clean

water to remove any cement paste left over to avoid staining

when the brick dries up.

Take all necessary precautions to protect yourself from dust.

Use safety glasses and a dust mask.

Chop saw with

diamond blade

Tool List

Tools and Equipment

A proper set of tools will get the job done right. Safety is the number one item on

any construction project. Use protective eye wear when cutting brick.