Installation Instructions

Window Sill Installation

Window sills require a bit of cutting and fitting. Install sill at a downward

angle to provide for water run off from the house.

• The space between the window

frame and the horizontal furring

strip has to be at least the

thickness of your sill plus 1/8”

(3mm) to insert the window sill.

• Cut the top of the bricks under

the window if needed.

• Apply a large bead of adhesive

along the top of the bricks and

the horizontal furring.

• Insert sill blocks under window

frame and set into adhesive.

• Insert a small filler piece and

attach with adhesive.

• Caulk between bottom of

window and top of sill.

Cut filler pieces to fit under the window

sill and secure with adhesive.

caulk between window frame and sill

secure sill and filler piece with construction

adhesive.

fasten each Novabrik under window sill with 2

screws, cut the top of the bricks if necessary

#8 or # 10 x 4” (100mm) corrosion-res screw,

either on the sides or underneath the sill.

Note: If necessary cut sills to equal length for a better harmonized look

under the window.