Installation Instructions

32
Novabrik on Various Types of Structures
Sill plate
• Secure the Novabrik with #8 or 10 x 2½”
(64mm) corrosion resistant screws at
every fourth course to each furring strip.
• Fasten the starter strip with #8 or #10 x 2½” (64mm)
corrosion resistant screws into sill plate or perimeter joist at
every furring strip.The screws must penetrate at least 1 1/4”
(32mm) into the perimeter joists or into the studs.
• Install 1” x 3” (19mm x 64mm) treated wood or furring strips and fasten
with #8 x 1½” (38mm) corrosion resistant concrete screws at 10”
(250mm) c.c.
Novabrik on Structural Insulated Panels (SIPs)
Before starting an SIPs project, consult a professional engineer for structural
requirements.
Sill plate