User manual

Problem Possible cause Solution
The room temperature is too
high.
Refer to climate class chart
on the rating plate.
Food products placed in the
appliance were too warm.
Allow food products to cool
to room temperature before
storing.
The FastFreeze function is
switched on.
Refer to "FastFreeze func‐
tion".
The FastCool function is
switched on.
Refer to "FastCool function".
There is too much frost and
ice.
The door is not closed cor‐
rectly or the gasket is de‐
formed/dirty.
Refer to "Closing the door".
The water drainage plug is
not correctly positioned.
Position the water drainage
plug in the correct way.
Food products are not wrap‐
ped properly.
Wrap the food products bet‐
ter.
Temperature is set incor‐
rectly.
Refer to "Operation" chap‐
ter.
The compressor does not
start immediately after
pressing the Fast‐
Freeze,FastCool or after
changing the temperature.
This is normal, no error has
occurred.
The compressor starts after
a period of time.
Water flows into the refriger‐
ator.
The water outlet is clogged. Clean the water outlet.
Food products prevent that
water flows into the water
collector.
Make sure that food prod‐
ucts do not touch the rear
plate.
Temperature cannot be set. The FastFreeze function is
switched on.
Switch off FastFreeze man‐
ually, or wait until the func‐
tion resets automatically to
set the temperature. Refer
to "FastFreeze function"
Temperature cannot be set. The FastCool function is
switched on.
Switch off FastCool manual‐
ly, or wait until the function
resets automatically to set
the temperature. Refer to
"FastCool function".
15