User manual

Problem Possible cause Solution
The water drainage plug is
not correctly positioned.
Position the water drainage
plug in the correct way.
Food products are not wrap-
ped properly.
Wrap the food products bet-
ter.
Temperature is set incorrect-
ly.
Refer to "Operation" chapter.
The compressor does not
start immediately after press-
ing the FastFreeze , Shop-
ping or after changing the
temperature.
This is normal, no error has
occurred.
The compressor starts after a
period of time.
Water flows on the rear plate
of the refrigerator.
During the automatic defrost-
ing process, frost melts on
the rear plate.
This is correct.
Water flows into the refrigera-
tor.
The water outlet is clogged. Clean the water outlet.
Food products prevent that
water flows into the water
collector.
Make sure that food prod-
ucts do not touch the rear
plate.
Water flows on the floor. The melting water outlet is
not connected to the evapo-
rative tray above the com-
pressor.
Attach the melting water out-
let to the evaporative tray.
Temperature cannot be set. The FastFreeze or Shopping
function is switched on.
Switch off FastFreeze or
Shopping manually, or wait
until the function resets auto-
matically to set the tempera-
ture. Refer to "FastFreeze
function" or " Shopping func-
tion".
Temperature cannot be set. The FastFreeze function is
switched on.
Switch off FastFreeze man-
ually, or wait until the function
resets automatically to set
the temperature. Refer to
"FastFreeze function"
Temperature cannot be set. The Shopping function is
switched on.
Switch off Shopping manual-
ly, or wait until the function
resets automatically to set
the temperature. Refer to "
Shopping function".
14