User manual

2. You can find the hole on the left side at
the back of the appliance. Lift the front
of the appliance and put it in the middle
of the space between the cupboards. If
the space between the bench
cupboards is larger than the width of
the appliance, you must adjust the side
measurement to centre the appliance.
If you changed the dimensions
of the cooker, you must align
the non-tip device correctly.
CAUTION! If the space
between the bench cupboards
is larger than the width of the
appliance, you must adjust the
side measurement to the centre
of the appliance.
Electrical installation
WARNING! The manufacturer is
not responsible if you do not
follow the safety precautions
from Safety chapters.
This appliance is supplied without a main
plug or a main cable.
Applicable cable type: H05 RR-F with
adequate cross-section.
WARNING! Before you connect
the mains cable to the terminal,
measure the voltage between
phases in the house network.
Then, refer to the connection
label at the back of the
appliance to use the correct
electrical installation. This order
of steps prevents from
installation errors and damage
to the electrical components of
the appliance.
WARNING! The power cable
must not touch the part of the
appliance shown in the
illustration.
ENERGY EFFICIENCY
Product information for hob according to EU 66/2014
Model identifi-
cation
FH68-412K
Type of hob Hob inside Freestanding Cooker
Number of
cooking zones
4
Heating tech-
nology
Solid Hot Plate
Diameter of
circular cook-
ing zones (Ø)
Left rear
Right rear
Right front
Left front
14.5 cm
18.0 cm
14.5 cm
18.0 cm
18