User manual

sharp-edged objects or a dishwasher. It
can cause damage to the nonstick
coating.
Stainless steel or aluminium
appliances
Clean the oven door with a
damp cloth or sponge only. Dry
it with a soft cloth.
Do not use steel wool, acids or
abrasive materials as they can
damage the oven surface. Clean
the oven control panel with the
same precautions.
Removing the shelf supports
To clean the oven, remove the shelf
supports.
1.
Pull the front of the shelf support away
from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove it.
2
1
Install the shelf supports in the opposite
sequence.
Removing and installing the
oven glass panels
You can remove the internal glass panels to
clean it. The number of glass panels is
different for different models.
WARNING! Keep the oven door
slightly open during the cleaning
process. When you open it fully
it may accidentally close causing
potential damage.
WARNING! Do not use the
appliance without the glass
panels.
1.
Open the door until it is at an angle of
approximately 30°. The door stands
alone when slightly open.
30°
2. Hold the door trim (B) at the top edge of
the door on both sides and push
inwards to release the clip seal.
1
2
B
3. Pull the door trim to the front to remove
it.
WARNING! When you take
out the glass panels the
oven door tries to close.
4. Hold the top edge of the door glass
panels and pull them up one by one.
14