User manual

5. Clean the glass panel with water and
soap. Dry the glass panel carefully.
When the cleaning is complete, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
Install the smaller panel first, then the larger.
CAUTION! The screen with a
printing on the inner glass panel
must face the inner side of the
door.
CAUTION! Make sure that after
installation the surface of the
frame of the glass panel on the
screen with a printing is not
rough when you touch it.
CAUTION! Make sure that you
install the internal glass panel in
the appropriate seats.
Removing the drawer
WARNING! Do not keep
flammable items (such as
cleaning materials, plastic bags,
oven gloves, paper or cleaning
sprays) in the drawer. When you
use the oven, the drawer can
become hot. There is a risk of
fire.
The drawer below the oven can be
removed for cleaning.
1. Pull the drawer out until it stops.
2. Slowly lift the drawer.
3. Pull the drawer out fully.
To install the drawer, do the above steps in
the opposite sequence.
Replacing the lamp
Put a cloth on the bottom of the interior of
the appliance. It prevents damage to the
lamp glass cover and the cavity.
WARNING! Danger of
electrocution! Disconnect the
fuse before you replace the
lamp.
The lamp and the lamp glass
cover can be hot.
1.
Deactivate the appliance.
2.
Remove the fuses from the fuse box or
deactivate the circuit breaker.
The back lamp
1.
Turn the lamp glass cover
counterclockwise to remove it.
2.
Clean the glass cover.
3. Replace the lamp with a halogen, 230
V, 40 W, 300 °C heat resistant lamp.
4. Install the glass cover.
15