User manual

BEFORE FIRST USE
WARNING! Refer to Safety
chapters.
Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial position.
Preheating
Preheat the empty appliance to burn off the
remaining grease.
1. Set the function and the maximum
temperature.
2. Let the appliance operate for 1 hour.
3. Set the function and set the
maximum temperature. The maximum
temperature for this function is 210 °C.
4. Let the appliance operate for 15
minutes.
Accessories can become hotter than usual.
The appliance can emit an odour and
smoke. This is normal. Make sure that the
airflow in the room is sufficient.
HOB - DAILY USE
WARNING! Refer to Safety
chapters.
Heat setting
Sym-
bols
Function
Off position
1 - 6
Heat settings
Use the residual heat to
decrease energy consumption.
Deactivate the cooking zone
approximately 5 - 10 minutes
before the cooking process is
completed.
Turn the knob to a necessary heat setting.
The hob control indicator comes on.
To complete the cooking process, turn the
knob to the off position.
If all cooking zones are deactivated, the
hob control indicator goes out.
Using the rapid hot plate
A red dot in the middle of the plate shows a
rapid hot plate. A rapid hot plate heats up
faster than usual plates. The red dots are
painted on the plates. They can deteriorate
during use and even disappear completely
after a period of time. It does not have an
effect on the performance of the hob.
HOB - HINTS AND TIPS
WARNING! Refer to Safety
chapters.
Cookware
The bottom of the cookware
must be as thick and flat as
possible.
8