User manual

Clock function Application
dur + End TIME DELAY To combine DURATION and END func‐
tion.
MINUTE MINDER To set countdown time (1 min - 23 h 59
min). This function has no effect on the
operation of the appliance.
Setting the DURATION
1. Set an oven function and temperature.
2. Press again and again until dur
starts to flash.
3. Press or to set the DURATION
time.
The display shows dur and symbol A.
4. When the time ends, dur flashes and
an acoustic signal sounds for 7
minutes. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
Setting the END
1. Set an oven function and temperature.
2. Press again and again until End
starts to flash.
3. Press or to set the time.
The display shows End and symbol A.
4. When the time ends, End flashes and
an acoustic signal sounds for 7
minutes. The appliance deactivates
automatically.
5. Press any button to stop the signal.
6. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
Setting the TIME DELAY
1. Set an oven function and temperature.
2. Press again and again until dur
starts to flash.
3. Press or to set the time for
DURATION.
4. Press .
5. Press or to set the time for END.
6. Press to confirm.
Appliance turns on automatically later on,
works for the set DURATION time and
stops at the set END time. At the set time
an acoustic signal sounds for 7 minutes.
The appliance deactivates automatically.
7. Press any button to stop the signal.
8. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
Setting the MINUTE MINDER
1. Press again and again until
starts to flash.
2. Press or to set the necessary
time.
3. When the set time ends, an acoustic
signal sounds fro 7 minutes. Press any
button to stop the acoustic signal.
Cancelling the clock functions
1. Press the again and again until the
necessary function indicator flashes.
2. Press and hold and buttons at
the same time.
The clock function goes out after some
seconds.
Changing the acoustic signal
1. To hear the current acoustic signal,
press and hold the button.
2. Repeatedly press to change the
signal.
3. Release the button.
15