User manual

If you have nonstick accessories, do not
clean them using aggressive agents,
sharp-edged objects or a dishwasher. It
can cause damage to the nonstick
coating.
Clean the moisture from the cavity after
each use.
Stainless steel or aluminium
ovens
Clean the oven door with a damp cloth or
sponge only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive
materials as they can damage the oven
surface. Clean the oven control panel with
the same precautions.
Removing the shelf supports
To clean the oven, remove the shelf
supports.
CAUTION! Be careful when
you remove the shelf supports.
1. Pull the front of the shelf support away
from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove it.
2
1
Install the removed accessories in the
opposite sequence.
Removing and installing the
oven glass panels
You can remove the internal glass panels
to clean it. The number of glass panels is
different for different models.
WARNING! Keep the oven
door slightly open during the
cleaning process. When you
open it fully it may accidentally
close causing potential
damage.
WARNING! Do not use the
appliance without the glass
panels.
1. Open the door until it is at an angle of
approximately 30°. The door stands
alone when slightly open.
30°
2. Hold the door trim (B) at the top edge
of the door on both sides and push
inwards to release the clip seal.
1
2
B
3. Pull the door trim to the front to
remove it.
24