17987 49/0en 16-05-2007 9:09 Pagina 1 www. .
117987 49/0en 16-05-2007 9:09 Pagina 2 2 contents Contents Safety information 3 Product description 5 Control panel 6 First use 10 Daily use 14 Washing programmes 27 Care and cleaning 29 Something not working 32 Technical data 35 Hints for test institutes 37 Installation 39 Environment concerns 43 Warranty / customer service 44 The following symbols are used in this manual: Important information concerning your personal safety and information on how to avoid damaging the appli
117987 49/0en 16-05-2007 9:09 Pagina 3 safety information 3 Safety information ● In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
117987 49/0en 16-05-2007 9:09 Pagina 4 4 safety information ● ● ● Keep all packaging well away from children. There is risk of suffocation. Keep all detergents in a safe place out of children’s reach. Keep children well away from the dishwasher when the door is open. Installation Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier. ● All packaging must be removed before use.
117987 49/0en 16-05-2007 9:09 Pagina 5 product description 5 Product description 1 2 3 4 5 6 7 8 9 1 Ceiling spray arm 2 Upper basket 3 Upper basket spray arm 4 Filters 5 Lower spray arm 6 Detergent dispenser 7 Rinse aid dispenser 8 Rating plate 9 Salt container This dishwasher has an internal light; in case that this light has to be replaced, please contact your local Service Force Centre.
117987 49/0en 16-05-2007 9:09 Pagina 6 6 control panel Control panel 1 On/Off button 2 Programme selection button 3 Half load button 4 Sanitize button (Antibac) 5 Extra rinse button 6 Multi-tab button (3 in 1) 7 Delay start button (Timer) 8 Digital display 9 Indicator lights The digital display indicates: - the level of hardness to which the water softener is set, - the number corresponding to the washing programme, - the approximate remaining time of the running programme, -
117987 49/0en 16-05-2007 9:09 Pagina 7 control panel 7 Half load button This option is useful and economical when baskets are not fully loaded. It reduces the consumption of water and energy. Remember to load both baskets. When using this option we recommend to reduce the dose of detergent that is normally used for a complete load. Sanitize button During the last rinse, this option allows to increase the temperature to 68°C and be held at over 65°C for at least 10 minutes.
117987 49/0en 16-05-2007 9:09 Pagina 8 8 control panel Setting mode ● ● Press On/Off button, programme selection button light is illuminated and 2 horizontal lines (--) are visible in the digital display = appliance in setting mode. Press On/Off button, programme selection button light is illuminated and the time duration (in minutes) of a programme is visible in the digital display = last performed or selected programme still set.
117987 49/0en 16-05-2007 9:09 Pagina 9 control panel 9 Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing: - setting of the water softener - end of programme - intervention of an alarm due to malfunction It is possible to deactivate the audible signals, using some of the buttons on the control panel. Factory setting: audible signals activated Deactivation/activation of the audible signals 1. Press the On/Off button.
117987 49/0en 16-05-2007 9:09 Pagina 10 10 first use First use Before using your dishwasher for the first time: ● Ensure that the electrical and water connections comply with the installation instructions ● Remove all packaging from inside the appliance ● Set the water softener ● Pour 1 litre of water inside the salt container and then fill with dishwasher salt ● Fill the rinse aid dispenser If you want to use combi detergent tablets such as: ‘3 in 1’, ‘4 in 1’, ‘5 in 1’ etc...
7987 49/0en 16-05-2007 9:09 Pagina 11 first use 11 The dishwasher is factory set at level 5. 1. Press the On/Off button. The dishwasher must be in setting mode. 2. Press simultaneously and keep pressed buttons 2 and 3, until the lights of buttons 1, 2 and 3 start flashing. 4. To change the level, press button 1. Each time the button is pressed the level changes. (For the selection of the new level see the chart). Examples: if the current level is 5, by pressing button 1 once, level 6 is selected.
117987 49/0en 16-05-2007 9:09 Pagina 12 12 first use Filling with dishwasher salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes.
117987 49/0en 16-05-2007 9:09 Pagina 13 first use 13 Filling with rinse aid Rinse aid ensures thorough rinsing, and spot and streak free drying. Rinse aid is automatically added during the last rinse. According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage). 1. Open the container by pressing the release button (A). The dose is factory set in position 4. 2.
117987 49/0en 16-05-2007 9:09 Pagina 14 14 daily use Daily use ● Check if it’s necessary to refill with dishwasher salt or rinse aid ● Load cutlery and dishes into the dishwasher. ● Fill with dishwasher detergent . ● Select a wash programme suitable for the cutlery and dishes. ● Start the wash programme. Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.
117987 49/0en 16-05-2007 9:09 Pagina 15 daily use 15 For washing in the dishwasher the following cutlery and dishes are not suitable: - Cutlery with wooden, horn, china or mother-ofpearls handles. - Plastic items that are not heat resistant. - Older cutlery with glued parts that are not temperature resistant. - Bonded cutlery items or dishes. - Pewter or copper items. - Lead crystal glass. - Steel items prone to rusting. - Wooden platters. - Items made from synthetics fibres.
117987 49/0en 16-05-2007 9:09 Pagina 16 16 daily use The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. A serving plate can be placed in front of the cutlery basket. The rear plate rack can be easily folded down to allow you to load pots, pans and bowls. Folding down the right plate rack will create another plate rack that allows you to load deep plates and bowls. 1.
117987 49/0en 16-05-2007 9:09 Pagina 17 daily use 17 The cutlery basket Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives. To make loading of the cutlery basket easier, lower the cutlery basket handle (fig.2). fig.
117987 49/0en 16-05-2007 9:09 Pagina 18 18 daily use The cutlery basket is in two parts which can be separated to give greater loading flexibility. To separate the two parts, slide them horizontally in opposite directions and pull them apart (fig. 4). fig. 4 To reassemble, reverse the procedure.
117987 49/0en 16-05-2007 9:09 Pagina 19 daily use 19 The upper basket The upper basket is designed for saucers, salad bowls, cups, glasses, pots and lids. Glass holders For glasses with long stems and tall cylindrical glasses, fold up the glass holder. (Top picture) To unload or when not needed, fold the glass holder back to the right. (Middle picture). Glasses can also be placed over the bars pointing up. (Bottom picture).
117987 49/0en 16-05-2007 9:09 Pagina 20 20 daily use Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. The adjustment of the height of the upper basket is possible also when the basket has been loaded. Moving the upper basket to the higher / lower position: 1. Pull out the basket completely. 2. Raise the upper basket as far as it will go and then lower it vertically.
117987 49/0en 16-05-2007 9:09 Pagina 21 daily use 21 Maximum plate sizes with upper basket in higher position. 18 32 25 Arrangement of large plates in the lower basket. Maximum plate sizes with upper basket in lower position.
117987 49/0en 16-05-2007 9:10 Pagina 22 22 daily use Use of detergent 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent Only use detergents specifically designed for use in dishwashers. Please observe the manufacturer’s dosing and storage recommendations as stated on the detergent packaging. 3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2).
117987 49/0en 16-05-2007 9:10 Pagina 23 daily use 23 Multi-tab function This appliance is equipped with the Multi-tab function, that allows the use of combi detergent tablets. These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose (‘3 in 1’, ‘4 in 1’, ‘5 in 1’ etc...) Check whether these detergents are suitable for your water hardness. See the manufacturers instructions.
117987 49/0en 16-05-2007 9:10 Pagina 24 24 daily use Activation/deactivation of the rinse aid dispenser 1. Press the On/Off button. The dishwasher must be in setting mode. 2. Simultaneously press and hold buttons 2 and 3, until the lights of buttons 1, 2, and 3 start flashing. If you decide to turn back to the use of standard detergent system we advise that you: 1. Deactivate the Multi-tab function. 2. Fill up the salt container and the rinse aid dispenser again. 3.
117987 49/0en 16-05-2007 9:10 Pagina 25 daily use 25 Select and start a washing programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings. 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate 2. Check that the water tap is opened 3. Press the On/Off button.
117987 49/0en 16-05-2007 9:10 Pagina 26 26 daily use ● Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again. Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary. Attention! Hot steam may escape when the door is opened. Open the door carefully. Interrupt a washing programme in progress: ● Open the dishwasher door; the programme will stop.
117987 49/0en 16-05-2007 9:10 Pagina 27 washing programmes 27 Washing programmes Programme Degree of soil Type of load P1 Auto (1) Heavy soil Crockery, cutlery, pots and pans Prewash Main wash up to 50°C or 65°C 1 or 2 intermediate rinses Final rinse Drying P2 Glass Normal soil Delicate crockery and glassware Main wash up to 45°C 1 intermediate rinse Final rinse Drying Heavy soil Crockery, cutlery, pots and pans Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying Normal
117987 49/0en 16-05-2007 9:10 Pagina 28 28 washing programmes Washing programmes information (1) During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is automatically adjusted between 50°C and 65°C. (2) Test programme for test institutes.
117987 49/0en 16-05-2007 9:10 Pagina 29 care and cleaning 29 Care and cleaning Cleaning the filters The filters must be checked and cleaned from time to time. Dirty filters will degrade the washing result. NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters will produce poor washing results and will result in damage to the appliance. Fine filter The fine filter (2) must be cleaned from time to time. 1. Open the door and remove the lower basket. 2.
117987 49/0en 16-05-2007 9:10 Pagina 30 30 care and cleaning Cleaning the spray arms Regularly check the nozzles in the 3 spray arms for blockages. If necessary clean the nozzles with a piece of fine wire or a fine needle and a strong water jet. Upper basket spray arm 1. Remove the upper basket spray arm by turning it laterally. Do not damage the nozzle openings. 2. Clean spray arm nozzles. 3. To replace the spray arm, press upwards until you feel it snap into place. Lower spray arm 1.
117987 49/0en 16-05-2007 9:10 Pagina 31 care and cleaning 31 External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). ● Polished chromium steel surfaces Remove light dirt with a clean, damp, soft cloth. Microfibre cloths are particularly good.
117987 49/0en 16-05-2007 9:10 Pagina 32 32 something not working Something not working The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Switch off the appliance and carry out the following suggested corrective actions.
117987 49/0en 16-05-2007 9:10 Pagina 33 something not working 33 Malfunction The programme does not start Once these checks have been carried out, switch on the appliance. The programme will continue from the point at which it was interrupted. If the malfunction or fault code reappears contact the Service Force Centre. For other fault codes not described in the above chart, please contact your Service Force Centre. Contact your local Service Force Centre, quoting the model (Mod.
117987 49/0en 16-05-2007 9:10 Pagina 34 34 something not working The wash results are not satisfactory The dishes are not clean The dishes are wet and dull There are streaks, milky spots or a bluish coating on glasses and dishes Water drops have dries onto glasses and dishes ● The wrong washing programme has been selected. ● The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.
117987 49/0en 16-05-2007 9:10 Pagina 35 technical data 35 Technical data Dimensions Width 54.6 cm Height 75.9 cm Depth 56.3 cm Electrical connection Voltage - Overall power Fuse Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher’s door Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa) Capacity Max.
117987 49/0en 16-05-2007 9:10 Pagina 36 36 technical data Consumption values Programme Programme duration (in minutes) Energy consumption (in kWh) Water consumption (in litres) P1 - Auto 85 - 105 1.1 - 1.5 12 - 22 P2 - Glass 65 - 75 0.8 - 0.9 13 - 14 P3 - Intensive 105 - 115 1.8 - 2.0 22 - 24 P4 - Normal 100 - 110 1.3 - 1.5 15 - 17 175 1.0 15 P6 - Quick 30 0.9 8 P7 - Prewash 7 0.
117987 49/0en 16-05-2007 9:10 Pagina 37 hints for test institutes 37 Hints for test institutes Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see ‘Consumption values’). Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see ‘Consumption values’).
117987 49/0en 16-05-2007 9:10 Pagina 38 38 hints for test institutes Arrangement upper basket (upper basket in lowered position) Arrangement lower basket
117987 49/0en 16-05-2007 9:10 Pagina 39 installation 39 Installation Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. This dishwasher is designed to be fitted under a kitchen counter or worksurface.
117987 49/0en 16-05-2007 9:10 Pagina 40 40 installation ● Place the water inlet hose in such a way that it is never higher than the bottom edge of the safety valve. K E A C 70 C G 546 100 N 550 180 550 B 20 B Warning! Dangerous voltage A = drain outlet G = size of the appliance K = cold water supply N = size of the recess W = hot water supply E = socket 50 600 W 400 A water inlet hose with safety valve must only be replaced by the Service Force Centre. D max.
117987 49/0en 16-05-2007 9:10 Pagina 41 installation 41 When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.
117987 49/0en 16-05-2007 9:10 Pagina 42 42 installation 1. Stand the appliance in front of the kitchen unit. Place cable and hoses into the neighbouring unit. Other fixing possibilities: on the plinth 2. Push the appliance in, pull the cable and hoses through and ensure that they are not kinked or squashed. 50 105 3. Line up the appliance and fix it on both sides in the upper area of the tub casing.
117987 49/0en 16-05-2007 9:10 Pagina 43 environment concerns 43 Environment concerns Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. When a unit is no longer being used: - Pull the plug out of the socket. - Cut off the cable and plug and dispose of them.
117987 49/0en 16-05-2007 9:10 Pagina 44 44 warranty / customer service Warranty / customer service For each product we provide a twoyear guarantee from the date of purchase or delivery to the consumer (with a guarantee certificate, invoice or sales receipt serving as proof). The guarantee covers the costs of materials, labour and travel.
117987 49/0en 16-05-2007 9:10 Pagina 45 warranty / customer service 45 Unsere Kundendienst-Telefonnummer: Le numéro de téléphone de notre service après-vente: Il nostro numero di telefono del servizio clientela: Our customer service telephone number: 0848 559 111 oder unter ou sur Internet oppure su Internet or in the internet www.fust.ch Dipl. Ing FUST AG Buchental 4 9245 Oberbüren Tel. (071) 955 50 50 Dipl. Ing. FUST AG Riedmoosstrasse 3172 Niederwangen-Bern Tel. (031) 980 11 11 Dipl. Ing.
117987 49/0en 16-05-2007 9:10 Pagina 46 46 Notes ........................................................... ........................................................... ........................................................... ........................................................... ........................................................... ........................................................... ........................................................... ......................................
117987 49/0en 16-05-2007 9:10 Pagina 47
117987 49/0en 16-05-2007 117987 49/0 - 00 - 11042007 9:10 Pagina 48 www. .
