User manual

30 care and cleaning
Cleaning the spray arms
Regularly check the nozzles in the 3
spray arms for blockages. If
necessary clean the nozzles with a
piece of fine wire or a fine needle and
a strong water jet.
Do not damage the nozzle openings.
3. Clean the spray arm and the fixing
screw.
4. Fasten the spray arm with the
fixing screw (A) by turning it
clockwise.
Ceiling spray arm
1. Undo the fixing screw (A) by
turning it anti-clockwise.
2. Pull the spray arm off the shaft.
A
Upper basket spray arm
1. Remove the upper basket spray
arm by turning it laterally.
2. Clean spray arm nozzles.
3. To replace the spray arm, press
upwards until you feel it snap into
place.
3. Clean the spray arm and the fixing
screw.
4. Fasten the spray arm with the
fixing screw (B) by turning it
clockwise.
Lower spray arm
1. Undo the fixing screw (B) by
turning it anti-clockwise.
2. Pull the spray arm off the shaft.
B
117987 49/0en 16-05-2007 9:10 Pagina 30