User manual

Open loading door:
Use force to push against the loading
door (push point)
2. Load your laundry (do not force it in).
Caution! Do not jam laundry in between
the loading door and rubber seal.
3. Close loading door securely. Lock must
audibly lock.
Selecting the programme
Use the programme selector to set the pro-
gramme you require. The estimated time to
end of the programme appears on the LCD,
e.g.
( hours . minutes ).
During the cycle, time elapses by steps of
one minute.
Dryness (Trockengrad)
Increases the dryness of the dried laundry
adequately to the selected level:
,
, . This option helps to achieve
satisfying result of drying.
- default dryness level.
Spin Speed (U/Min)
Shorten the drying cycle adequately to the
spin speed the laundry was spun previously
in the washing machine. The higher spin
speed was, the shorter drying cycle length.
Available spin speed values (rpm): from
up to (with 200 rpm steps)
This option allows to save time and energy.
Long Anti-crease (Knitterschutz Plus)
Prolongs standard anti-crease phase at the
end of the drying cycle to 90 min. When ac-
tive the symbol
is on. This option helps to
keep laundry free from creases. Laundry can
be removed at any time during the anti-
crease phase.
Buzzer (Signal)
Audible confirmation of:
–cycle end
– anti-crease phase start and end
– cycle interruption
–error
When active the symbol
is on.
Time (Zeitwahl)
Operates only with Time Programme (Zeit-
programm). Allows to set individual time of
drying from minimum 10 min. to maximum of
3 hours (in 10 min. steps).
1. Turn the programme knob to the Time
Programme (Zeitprogramm).
2. Press the Time (Zeitwahl) button repeat-
edly until the desired programme dura-
tion is shown in the display, e.g.
for
a programme of 1 hour and 20 minutes.
Delay Start (Zeitvorwahl)
Allows to delay the start of a drying pro-
gramme from minimum of 30 min. to
maximum of 20 hours.
1. Select the drying programme and addi-
tional options.
2. Press the Delay Start (Zeitvorwahl) button
repeatedly until the desired delay start is
shown in the display, e.g.
if the pro-
gramme has to start after 12 hours.
3. To activate the delay timer, press the
Start/Pause button. Time to start elapses
in the displayed.
Setting child lock
The child lock can be set to prevent a pro-
gramme being accidentally started or a pro-
gramme in operation being accidentally
changed. The child lock function locks all
buttons and the programme knob. The child
lock can be activated or deactivated by hold-
ing down the Long Anti-crease (Knitterschutz
Plus) and Buzzer (Signal) buttons simultane-
ously for 5 seconds.
59