User manual

Touch the button again to start
the programme immediately.
Interrupting a programme and
changing the options
You can change only some options before
they operate.
1. Touch .
The indicator of this button flashes.
2. Change the options. If you change any
option the Ende in/Fini dans option (if
set) will be disabled.
3. Touch
again.
The programme continues.
Cancelling a programme
1. Press the button for some seconds
to cancel the programme and to
deactivate the appliance.
2.
Press the same button again to activate
the appliance. Now, you can set a new
washing programme.
Before starting the new
programme the appliance could
drain the water. In this case,
make sure that the detergent is
still in the detergent
compartment, if not fill the
detergent again.
Opening the door
While a programme (or the ) operates,
the appliance door is locked. The indicator
is on.
CAUTION! If the temperature
and level of the water in the
drum are too high, you cannot
open the door.
To open the door during the first
minutes of the cycle (or when the
operates) :
1. Touch the button to pause the
appliance.
2. Wait until the indicator
goes off.
3. You can open the door.
4. Close the door and touch the button
again. The programme (or the )
continues.
At the end of the programme
• The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
• In the display comes on.
• The indicator of the button goes off.
• You can open the door.
• Remove the laundry from the appliance.
Make sure that the drum is empty.
• Press the button for some seconds
to deactivate the appliance.
• Close the water tap.
• Keep the door and the detergent drawer
ajar, to prevent the mildew and odours.
The washing programme is completed,
but there is water in the drum:
• The drum turns regularly to prevent the
creases in the laundry.
• The indicator
flashes to remind you
to drain the water.
• The door lock indicator is on. The
indicator of button
flashes. The door
stays locked.
• You must drain the water to open the
door.
Draining the water:
1. To drain the water.
• Touch the button
. The
appliance drains the water and spins
with the maximum spin speed for
selected washing programme.
• Alternatively, touch the button to
change the spin speed and then
touch the button
. The appliance
drains the water and spins. If you set
, the appliance only drains.
2. Press the button for some seconds
to deactivate the appliance.
14