Installation Instructions

Installation Instructions / OmniAssure Touch Mullion 5
8 CE Declaration of conformity
Hereby, the Novar GmbH declares that the radio equip-
ment readers OmniAssure, item no. OT3300BHONG,
OT3200BHONG, OT3312BHONG, OT3212BHONG,
OT3300WHONG, OT3200WHONG, OT3312WHONG
and OT3212WHONG are in compliance with Directive
2014/53/EU.
This symbol on our product shows a crossed-out
"wheelie-bin" as required by law regarding the Waste
of Electrical and Electronic Equipment (WEEE) disposal.
This indicates your responsibility to contribute in saving
the environment by proper disposal of this Waste i.e.
Do not dispose of this product with your other wastes.
To know the right disposal mechanism please check the
applicable law.
The full text of the EU declaration can be downloaded from our homepage
https://www.security.honeywell.de/ in the service/download area.
9 Technical specification
Dimensions 1.97 x 5.67 x 0.87 inch / 50 x 144 x 22,3 mm
Operating temperature -40 °F to 151 °F / -40 °C to 66 °C
Protection class IP65
Environmental class III
Protection class UL IP4X / IK04 (enclosure)
Humidity condition max. 93±2% at 32±2 °C / 89.6±3.6 °F
0 - 95% non-condensing
Installation and use Indoor and outdoor usage
Interfaces Wiegand; RS-485
Reading range 0 ... ≈2.75" / 0 ... ≈70 mm (depending on credential)
BLE range 0 ... ≈197" / 0 ... ≈5 m
Power supply reader 7.0 V to 18 V DC (12 V recommended)
mA
Watt
at 7 V DC at 12 V DC at 18 V DC
avg peak avg
1)
peak
2)
avg
1)
peak
2)
avg
1)
peak
2)
Power consumption
Current consumption
1.8 4.0 250 530 150 320 100 220
Used frequency bands
- 119 kHz to 135 kHz
- 13.56 MHz
- 2400 to 2483.5 MHz
Transmitted power
< 10 dBμA/m
< 0 dBμA/m
< 1 mW e.i.r.p.
1) The "average" current is measured in Idle mode (factory setting, light
ring is slightly blue)
2) The "peak" current is measured with card activation (factory setting,
light ring is on)