Assembly

A S S E M B L Y I N S T R U C T I O N S
WA L L M O U N T
E 1x L Hex Key
D
2x Screws
A
2x Straps with Brackets
C 2x Fischer Plugs B 2x Screws
Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over it must
be permanently fixed to the wall with the included wall attachment devices. Please note the fastening devices
included are not suitable for all wall types. Use fastening devices suitable for the walls in your home. For advice on
suitable fastening devices, please contact your local hardware store.
W A R N I N G
A
B
20
min
© 2020 NOVASOLO Wall Mount Assembly Instructions
Step 2
Locate the wall stud
Find the 2 holes on the backside of
the product. They are located on
the top left and top right corners of
the product. Securely install Part A
and Part B in each hole. Tighten
with Part E.
Step 1
Attach wall mount to the product
C
Using Part D safely secure Part A
from the back of the product to the
wall.
A
D
Drill 2 holes in the wall based on
the pencil markings in Step 2 to
install Part C.
The wall mount is installed and the
product is ready to use.
Step 3
Drill holes in the wall
Step 4
Attach wall mount to the wall stud
Step 5
Enjoy!
Place the product against the wall to determine where it will be anchored. Use a
stud finder to locate the wall stud. Mark on the wall in pencil where the wall mount
straps will be attached into the wall stud. Measure to ensure the distance
between the 2 markings on the wall is equal to the distance between the 2 straps
on the product.