Assembly
Table Of Contents
Always use the proper tools during assembly. Follow the assembly steps in order. DO NOT skip any steps. Be sure to
check all packing materials carefully for assembly hardware. If any parts are missing, contact the retailer from which
you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS. During assembly
tighten screws first by hand. Once all screws are in place use the tool provided to tighten. Periodically check to
ensure that all hardware (bolts, screws, etc.) are tight. DO NOT stand on the product during assembly. Where
assembly instructions state that assembly requires two or more people, DO NOT attempt to assemble by yourself as
there is a risk of injury.
C
6x Fischer Plugs
B
2x Wood Plank
A
1x Coatrack
D
6x Screws
6x C
Step 3
A
Step 6
Step 2
6x
6x
6x D
6x
Step 4
6x
2x B
Step 5
2x B
2x B
© 2020 NOVASOLO D912TK Installation Instructions
H Y G G E
I N S T A L L A T I O N I N S T R U C T I O N S | D 9 1 2 T K
NOTE: FLOATING COAT RACKS AND WALL SHELVES MUST BE
MOUNTED DIRECTLY INTO A CONCRETE WALL OR WALL STUD.
Always use the proper tools during assembly. Follow the assembly steps in order. DO NOT skip any steps. Be sure to
check all packing materials carefully for assembly hardware. If any parts are missing, contact the retailer from which
you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS. During assembly
tighten screws first by hand. Once all screws are in place use the tool provided to tighten. Periodically check to
ensure that all hardware (bolts, screws, etc.) are tight. DO NOT stand on the product during assembly. Where
assembly instructions state that assembly requires two or more people, DO NOT attempt to assemble by yourself as
there is a risk of injury.
C
6x Fischer Plugs
B
2x Wood Plank
A
1x Coatrack
D
6x Screws
6x C
Step 3
A
Step 6
Step 2
6x
6x
6x D
6x
Step 4
6x
2x B
Step 5
2x B
2x B
© 2020 NOVASOLO D912TK Installation Instructions
H Y G G E
I N S T A L L A T I O N I N S T R U C T I O N S | D 9 1 2 T K
NOTE: FLOATING COAT RACKS AND WALL SHELVES MUST BE
MOUNTED DIRECTLY INTO A CONCRETE WALL OR WALL STUD.