Assembly

Step 2
© 2020 NOVASOLO Nordic Buffet Series Assembly Instructions
WA R N I N G
Always use the proper tools during assembly. Follow the assembly steps in order. DO NOT skip any steps. Be sure to
check all packing materials carefully for assembly hardware. If any parts are missing, contact the retailer from which
you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS. During assembly
tighten screws first by hand. Once all screws are in place use the tool provided to tighten. Periodically check to
ensure that all hardware (bolts, screws, etc.) are tight. DO NOT stand on the product during assembly. Where
assembly instructions state that assembly requires two or more people, DO NOT attempt to assemble by yourself as
there is a risk of injury.
D Wall Mount - Anti Tip Kit C
1x Wrench
B
4x Bolts A
2x Iron Legs
FRONT
1x C
2x
Step 3
LEGS & HARDWARE
LEGS &
HARDW
ARE
Step 1
Step 4
2x A
4x B
Step 5 Step 6
N O R D I C
A S S E M B L Y I N S T R U C T I O N S
KK NO 19005, KK NO 18001, KK NO 19002, KK NO 19006, KK NO 19008, KK NO 19054, MD RT 19052,
MD RT 18050, MD RT 19053, MD RT 19050, MD RT 19051, MD RT 19054, BW RT 19052, BW RT 18050,
BW RT 19053, BW RT 19050, BW RT 19051 & BW RT 19054
2x
4x
Nordic, Nordic Rattan & Nordic Mindi Rattan Collections
A S S E M B L Y I N S T R U C T I O N S
WA L L M O U N T
Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over it must
be permanently fixed to the wall with the included wall attachment devices. Please note the fastening devices
included are not suitable for all wall types. Use fastening devices suitable for the walls in your home. For advice on
suitable fastening devices, please contact your local hardware store.
© 2020 NOVASOLO Wall Mount Assembly Instructions
2x B
Using Part C safely secure the wall
mount bracket from Part A to the
wall.
A
Drill 2 holes in the wall based on
the pencil markings in Step 2 to
install Part B.
Move the product to its final
position. Line up the wall mount
bracket on the product with the wall
mount bracket on the wall. Thread
the strap through the 2 brackets
and tighten until snug and secure.
Step 3
Drill holes in the wall
Step 4
Attach wall mount to the wall stud
Step 5
Secure wall mount and enjoy!
WA R N I N G
20
min
A
2x C
Attach one of the wall mount brackets
from Part A to the top centre back of
the product. Using Part D, screw
directly into the back of the product to
secure the wall mount bracket.
Step 1
Attach wall mount to the product
Step 2
Locate the wall stud
Place the product against the wall to determine where it will be anchored.
Use a stud finder to locate the wall stud. Mark on the wall in pencil where the
other wall mount bracket from Part A will be attached into the wall stud.
Measure to ensure the distance between the markings on the wall is equal to
the distance between the 2 holes in the wall mount bracket.
+ +
2x D
The product image in the assembly instructions is included for the purposes of depicting the assembly
steps. The assembly instructions apply to all models shown below.
*
B 2x Fischer Plugs
A 1 Strap with 2 Brackets
D 2x Drywall Screws #6x3/4" C 2x Drywall Screws #6x1”