Integration Guide
Table Of Contents
- 1 Introduction
- 2 Module Power
- 3 Interfaces
- 4 Hardware Design Guidelines
- Advanced Tips for an RF-Friendly Layout
- Audio Reference Design
- Control Connector Signal Descriptions and Functions
- Module Power (PINS 87, 89, 91, 93, 95, 97, 99)
- Modem Power-on and Recovery Techniques
- Power Switch Logic Detect (Pin 85)
- ON/OFF (PIN 37)
- Phone On - PON (PIN 35)
- Internal Power Switch
- Voltage Reference - VREG_MSME1.8 (PIN 77)
- USB (PINS 1, 3, 5, 7)
- General Purpose Input/Output Interface
- RTC Sleep
- Serial Interfaces and Handshake (Pins 11, 13, 15, 17, 19, 21, 23, 25)
- UART 2 (Pins 27, 29)
- Digital Audio Interface (Pins 12, 14, 16, 18)
- 32 kHz Output (PIN 56)
- Analog-to-Digital Inputs (PIN 44 and 74)
- Handset Microphone Input (PINS 65, 67)
- Handset Microphone BIAS Output (PINS 53, 63)
- Handset Speaker Output (PINS 71, 73)
- Headset Microphone Input (PIN 55)
- Headset Speaker Output Left and Right (PINS 57, 59)
- Headset Detect (PIN 47)
- Circuit Protection
- 5 USB Driver Installation
- i -
General
TERMS OF USE OF NEW MATERIALS - PLEASE READ CAREFULLY
From time to time, Novatel Wireless, in its sole discretion, may make available for download
on its website (www.nvtl.com), or may transmit via mail or email, updates or upgrades to, or
new releases of, the firmware, software or documentation for its products (collectively, 'New
Materials'). Use of such New Materials is subject to the terms and conditions set forth below,
and may be subject to additional terms and conditions as set forth in Novatel Wireless's
Technical Support Policy (posted on its website) and/or any written agreement between the
user and Novatel Wireless.
All New Materials are provided AS IS. Novatel Wireless makes no warranty or representation
with respect to the merchantability, suitability, functionality, accuracy or completeness of any
such New Materials. The user of such New Materials assumes all risk (known or unknown) of
such use. Novatel Wireless reserves all rights in such New Materials. The user shall have only a
revocable and limited license to use such New Materials in connection with the products for
which they are intended. Distribution or modification of any New Materials without Novatel
Wireless's consent is strictly prohibited.
IN NO EVENT WILL NOVATELWIRELESS BE RESPONSIBLE FOR ANY INCIDENTAL,
INDIRECT, CONSEQUENTIAL OR SPECIAL DAMAGES AS A RESULT OF THE USE OF ANY
NEW MATERIALS. NOVATELWIRELESS 'S MAXIMUM LIABILITY FOR ANY CLAIM BASED
ON THE NEW MATERIALS SHALL NOT EXCEED FIFTY U.S. DOLLARS ($50).
Version Verification
Please ensure you have the latest version of this document by downloading it from
www.nvtl.com