User's Manual
Table Of Contents
- 1 Introduction
- 2 Module Power
- 3 Physical Interfaces
- Module Mounting to Host Board (Reference)
- Connectors
- Connectors
- I/O Connector Pin Assignments
- Circuit Protection
- Antenna
- Control Connector Signal Functions
- Module Power (Pins 85, 87, 89, 91, 93, 95, 97, 99)
- Power Control (Pin 35) - (PWR_CTL)
- Level Translation Reference Power (Pin 77)
- USB (Pins 1, 3, 5, 7, 9)
- General Purpose Input/Output Interface
- RTC Sleep
- Serial Interfaces & Handshake (Pins 11, 13, 15, 17, 19, 21, 23, 25)
- Multi-Channel Serial Interface (MCSI) – (Pins 12, 14, 16, 18)
- VBackup Input (Pin83)
- Using VBackup
- Analog-to-Digital Input (Pin 74)
- Handset Microphone Input (Pins 65, 67)
- Handset Microphone Bias Output (Pin 63)
- Handset Speaker Output (Pins 71, 73)
- Headset Microphone Input (Pin 55)
- Headset Microphone Bias Output (Pin 53)
- Headset Speaker Output Left & Right (Pins 57, 59)
- Headset Output Common Mode (Pin 61)
- Headset Detect (Pin 47)
- Subscriber Identity Module (SIM) Carrier (Pins 76, 78, 80, 82, 84)
- 4 Hardware Design
- General Design Guidelines for Using Novatel Wireless M2M GSM Modules
- Enabling the Transmission Modes for the GSM/GPRS Services
- Voice Communication
- Circuit-Switched Data
- SMS: Short Message Services
- Provisioning The SIM
- GSM Services Supported by the Novatel Wireless M2M Enabler IIIG Module
- GPRS Services Supported by the Novatel Wireless M2M Enabler IIIG Module
- Selecting the GSM Modes of Operation
- 5 Setup and Initialization
- 6 Integration and Testing
xii novatelwireless.com
References
Refer to the following sources for more information on the Enabler IIIG:
Manuals
l
GSM0308AT001 - Novatel Wireless M2M GSM/GPRS OEM Module AT Command Set
Reference
l
GSM0308UG001 - Novatel Wireless M2M GSM-GPRS Family API Reference
l
GSM0308SD001 - Enabler IIIG - SDK Guide
Application Notes
l
GSM0000AN001 - Enabler-G PPP Configuration for Windows 98
l
GSM0000AN002 - Enabler-G PPP Configuration for Windows 2000
l
GSM0000AN003 - Enabler-G Data Circuit Switched Call Configuration and Use
l
GSM0000AN004 - Enabler-G SMS Configuration and Use
l
GSM0000AN005 - Enabler-G Automated Network Connection Configuration and Use
l
GSM0000AN006 - Enabler-G Module Status Query
l
GSM0000AN007 - Enabler-G Status Reporting
l
GSM0000AN008 - Enabler-G PPP Configuration for Windows XP
l
GSM0000AN009 - Dynamic IP Assignment Support
l
GSM0000AN010 - Enabler-G PPP Configuration for PocketPC 2002
l
GSM0000AN011 - PAD Configuration and Use
l
GSM0000AN012 - Network Transparency Configuration for PAD
l
GSM0000AN013 - Enabler-G Sleep Mode Configuration and Use
l
GSM0000AN014 - Anytime PPP API Access
l
GSM0000AN015 - Event Monitor and Reporting Overview
l
GSM0000AN016 - How to Send SMS Messages to an E-Mail Address
l
GSM0000AN017 - SMTP Mail Access via TCP PAD
l
GSM0000AN018 - USNO NTP Network Time Service TCP PAD
Technical Notes
l
GSM0000TN001 - Enabler-G Firmware Upgrade
l
GSM0000TN002 - Enabler-G PPP Negotiation Sequence
l
GSM0000TN006 - UDP Wakeup Message Header Decoding
l
GSM0000TN008 - Enabler Power Supply Requirements
l
GSM0000TN009 - Server Application Design Considerations for Dynamic IP
l
GSM0000TN012 – Enabler IIIG Engineering Mode Command Reference
l
GSM0000TN013 – Enabler IIIG and IIE CMUX Description
White Papers
l
GSM0000WP001 - Enabler-G Differentiation Features
GSM Device Specifications
l
3GPP TS 51010-1 (850, 900,1800,1900 MHz devices)