User's Manual
Table Of Contents
- 1 Introduction
- 2 Module Power
- 3 Physical Interfaces
- Module Mounting to Host Board (Reference)
- Connectors
- Connectors
- I/O Connector Pin Assignments
- Circuit Protection
- Antenna
- Control Connector Signal Functions
- Module Power (Pins 85, 87, 89, 91, 93, 95, 97, 99)
- Power Control (Pin 35) - (PWR_CTL)
- Level Translation Reference Power (Pin 77)
- USB (Pins 1, 3, 5, 7, 9)
- General Purpose Input/Output Interface
- RTC Sleep
- Serial Interfaces & Handshake (Pins 11, 13, 15, 17, 19, 21, 23, 25)
- Multi-Channel Serial Interface (MCSI) – (Pins 12, 14, 16, 18)
- VBackup Input (Pin83)
- Using VBackup
- Analog-to-Digital Input (Pin 74)
- Handset Microphone Input (Pins 65, 67)
- Handset Microphone Bias Output (Pin 63)
- Handset Speaker Output (Pins 71, 73)
- Headset Microphone Input (Pin 55)
- Headset Microphone Bias Output (Pin 53)
- Headset Speaker Output Left & Right (Pins 57, 59)
- Headset Output Common Mode (Pin 61)
- Headset Detect (Pin 47)
- Subscriber Identity Module (SIM) Carrier (Pins 76, 78, 80, 82, 84)
- 4 Hardware Design
- General Design Guidelines for Using Novatel Wireless M2M GSM Modules
- Enabling the Transmission Modes for the GSM/GPRS Services
- Voice Communication
- Circuit-Switched Data
- SMS: Short Message Services
- Provisioning The SIM
- GSM Services Supported by the Novatel Wireless M2M Enabler IIIG Module
- GPRS Services Supported by the Novatel Wireless M2M Enabler IIIG Module
- Selecting the GSM Modes of Operation
- 5 Setup and Initialization
- 6 Integration and Testing
xvi novatelwireless.com
Table of Contents
1 Introduction 1
Technical Specifications 3
Typical Usage 5
Contacting Novatel Wireless M2M 5
2 Module Power 6
Typical Operating Power 7
3 Physical Interfaces 8
Module Mounting To Host Board (Reference) 12
Connectors 15
Connectors 16
Coaxial Connector Option 16
RF Board-to-Board Connector Option 16
I/O Connector Pin Assignments 17
Circuit Protection 20
Antenna 21
Control Connector Signal Functions 21
Module Power (Pins 85, 87, 89, 91, 93, 95, 97, 99) 21
Power Control (Pin 35) - (PWR_CTL) 22
Turning On The Enabler IIIG 22
Turning Off The Enabler IIIG 23
Using The Power Control Signal 23
Modem Power Switch 25
Level Translation Reference Power (Pin 77) 26
USB (Pins 1, 3, 5, 7, 9) 27
General Purpose Input/Output Interface 27
RTC Sleep 29