User's Guide

Spider® AT
User's Guide P a g e 48 Revision: Draft
Appendix B – SIM Card Installation
SIM CARD HOLDER
The SIM holder is located inside the Spider Asset Tag. It is a standard flip-type SIM
holder that must be completely closed in order for the SIM card to make a secure
connection.
Figure 35 – Spider Asset Tag SIM Holder
SIM CARD INSTALLATION
1. Slide the SIM card into the open SIM holder.
2. Make sure the SIM card notch is lined up properly (see Figure 35).
3. Close the holder, and slide it until it is completely closed.
Note: The SIM card is not provided with the Spider Asset Tag device.
The SIM must be obtained from the GSM/GPRS service provider and
must be provisioned by the operator for data. Always take care to
protect the SIM