User's Guide

Spider® AT
User's Guide P a g e 49 Revision: Draft
Appendix C – Terminal Configuration
To send commands to the Spider AT, connect the USB mini end of the USB cable
to the USB connector on the Spider AT and the standard USB end to the USB port
of a PC.
This Appendix provides step by step instructions for using HyperTerminal to
configure the modem. However, any standard terminal emulator program can be
used.
SET UP HYPERTERMINAL TO CONFIGURE THE MODULE
These instructions illustrate how to correctly configure HyperTerminal in Windows
XP:
Setup HyperTerminal
1. On Windows XP, click on:
Start>Programs>Accessories>Communications>HyperTerminal
The Connection Description window appears (Figure 36).
Figure 36 - Connection Description Window
2. Enter a name for the Connection. In this example, the name is Enfora Com1.
3. Click OK. The Connect To window appears (Figure 37).