User's Manual

LPP0108IG001 52 Version - Preliminary – 06/20/08
7.12. BCI Command Parameters - Appendix 2
Table of BCI command parameters relating to per-unit calibration and system-level configuration.
 Calibration is required on every module.
 Configuration is required once and all modules configured likewise.
 Recommend leave all other parameters at default values.
Command Parameter Factory
Production
Calibration
Customer
Calibration
Factory
Configuration
Customer
Battery
Configuration
Customer
Charger
Configuration
AT$BCIVSF <num> X Opt.
<offset> X Opt.
AT$BCIISF <adc_num> X Opt.
<adc_offset> X Opt.
<pre_chgireg> X Opt.
AT$BCIAVG <alfaV> X Opt.
<alfaT> X Opt.
<alfaI> X Opt.
<sampling> X Opt.
AT$BCIDEL <cmd> Opt. Opt.
<id> Opt. Opt.
AT$BCIOFF <flag> Opt. Opt.
AT$BCICHG#
<type> X
<ci_chgireg> X
<ov_thr> X
< id_low> X
<id_high> X
AT$BCIBAT#
<type> X Opt.
<T1> X
<T2> X
<T3> X Opt.
<chg_again_thr> X
<cv_chgvreg> X Opt.
<id_low> X
<id_high> X
AT$BCIMAP#
<#_ci_elements> X Opt.
<10%> X Opt.
<20%> X Opt.
<30%> X Opt.
<40%> X Opt.
<50%> X Opt.
<60%> X Opt.
<70%> X Opt.
<80%> X
<90%> X
<100%> X
AT$BCIPCT#
<10%> X Opt.
<20%> X Opt.
<30%> X Opt.
<40%> X Opt.
<50%> X Opt.
<60%> X Opt.
<70%> X Opt.