User's Manual Part 1

AT Commands 69
P/N 90023363 Revision 1.8
ATS6
Description: CONNECTION HOLD OFF TIMER
This command sets the number of seconds the modem will wait before it
will begin blind dialing (dialing without checking for a dial tone). This
command sets the modem’s S-register 6.
This command is ignored when the modem is connected to a GSM network.
Syntax: ATS6[=<n>][?]
Parameters: =<n>, ?
=<n> is a number between 0 and 255 that represents the number of
seconds the modem will wait before blind dialing an outbound call.
This command sets S-register 6 to the number specified in <n>. The
default value for this register is 2.
? will query the S-register and return the register’s current value.
Response: If the user has typed the command ATS6?, the modem will return the
current value of the register and the string OK. For example:
4
OK
If the user has typed the command ATS6=<n>, the modem will only return
the string OK.
Example: ATS6=4<cr>
ATS7
Description: CONNECTION TIMEOUT
This command sets the number of seconds the modem will wait for the
connection to complete during an inbound or outgoing call, before it stops
attempting to connect. This command sets the modem’s S-register 7.
Syntax: ATS7[=<n>][?]
Parameters: =<n>, ?
=<n> is a number between 0 and 255 that represents the number of
seconds the modem will wait before stopping the connection
attempt. This command sets S-register 7 to the number specified in
<n>. The default value for this register is 60.
? will query the S-register and return the register’s current value.