User's Manual Part 1

78 AT Commands
Revision 1.8 P/N 90023363
AT+CBC
Description: BATTERY CHARGE STATUS INDICATION
This command is used to indicate battery charge status.
Syntax: AT+CBC
Parameters: None
Response:
<bcs> battery connection status
0 ME is powered by the battery
1 ME has a battery connected, but is not
powered by it
2 ME does not have a battery connected
3 Recognized power fault, calls inhibited
<bcl> battery connection level
0 battery is exhausted, or ME does not have a
battery connected
1..100 battery has 1 to 100 % of capacity remaining
Example: Test Response: +CBC: (list of supported <bcs>s),(list of supported
<bcl>s)