User's Manual Part 1

AT Commands 81
P/N 90023363 Revision 1.8
<status> 0 not active
1active
Response: If <mode><>2 and command successful
OK
If there is a network error:
+CCFC: 0, 0
If <mode>=2 and command successful (only in connection with <reas> 0 –
3)
For registered call forward numbers:
+CCFC: <status>, <class1>[, <number>, <type> [, <time>]]
[<cr><LF>+CCFC: ....]
OK
If no call forward numbers are registered (and therefore all classes are
inactive):
+CCFC: <status>, <class>
OK
where <status>=0 and <class>=7
If error is related to ME functionality:
+CME ERROR: <err>
Example: Input Output
Query AT+CCFC? Current mode OK
Set AT+CCFC=0,1,,,,,, OK
Tes t AT+CCFC=? List of possible selectIon
AT+CCLK
Description: CLOCK SETTING, TIME OF DAY, DATE
This command is used to set the local time for the device as well as
determining the current time. ME does not support time zone indication.
Syntax: AT+CCLK=<time>
Parameters:
<time> string type value; format is "yy/MM/dd,hh:mm:ss”; where
characters indicate year (two last digits), month, day, hour,
minutes and seconds.
e.i 22:10:00 GMT equals to "94/05/06,22:10:00"