User's Manual Part 1

82 AT Commands
Revision 1.8 P/N 90023363
Response:
Query +CCLK: <time>+CME ERROR: <err>
Te s t OK
AT+CCUG
Description: CLOSER USER GROUP
This command sets the Closed User Group supplementary service
parameters as a default adjustment for all following calls.
Syntax: AT+CCUG=[<n>] [,<index>[,<info>]]]
Parameters:
<speed>
0disable CUG
1 enable CUG
71 9600 bps (V.110 or X.31 flag stuffing)
<index> 0...9 CUG index
10 no index (preferred CUG taken from
subscriber data)
<info> 0 no information
1 suppress OA (Outgoing Access)
2 suppress preferential CUG
3 suppress OA and preferential CUG
Response: +CCUG: <n>,<index>,<info>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Example: Input Output
Query AT+CCUG? Current mode OK
Set AT+CCUG=0,1,,,,,, OK
Te s t AT+CCUG=? List of possible selections
AT+CCWA
Description: CALL WAITING
This command controls the Call Waiting supplementary service.
Activation, deactivation and status query are supported.
Syntax: AT+CCWA=[<n>] [,<mode>[,<class>]]]
Parameters: