User's Manual Part 1

AT Commands 91
P/N 90023363 Revision 1.8
Example: AT+CGDCONT? +CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<data_co
mp>,<head_comp>[,<pd1>[,…[,pdN]]]
[<cr><LF>+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,<data_co
mp>,<head_comp>[,<pd1>[,…[,pdN]]]
AT+CGEREP
Description: UNSOLICITED EVENT REPORTING CONTROL
Syntax: AT+CGEREP=[<mode>[,<bfr>]]
Parameters:
<mode> 0 buffer unsolicited result codes in the MT; if MT result
code buffer is full, the oldest ones can be discarded.
No codes are forwarded to the TE.
1 discard unsolicited result codes when MT-TE link is
reserved (e.g. in online data mode); otherwise
forward them directly to the TE
2 buffer unsolicited result codes in the MT when
MT?TE link is reserved (e.g. in online data mode)
and flush them to the TE when MT-TE link becomes
available; otherwise forward them directly to the TE
<bfr> 0 MT buffer of unsolicited result codes defined within
this command is cleared when <mode> 1 or 2 is
entered
1 MT buffer of unsolicited result codes defined within
this command is flushed to the TE when <mode> 1
or 2 is entered (OK response shall be given before
flushing the codes)
Unsolicited Response:+CGEV: NW DEACT <PDP_type>,<PDP_addr>[,<cid>]
+CGEV: ME DEACT <PDP_type>,<PDP_addr>[,<cid>]
+CGEV: NW DETACH
+CGEV: ME DETACH
+CGEV: ME CLASS <class>
<PDP_type>Packet Data Protocol type (see +CGDCONT
command)
<PDP_addr>Packet Data Protocol address (see +CGDCONT
command}
<cid> Context Id (see +CGDCONT command).
Note: <cid> only given if known to the MT.
<class> GPRS mobile class (see +CGCLASS command)
Query AT+CGEREP? OK