User's Manual

Using Connection Profiles 29
Manual Revision 1.0 P/N 90023333
7. Type the APN (Access Point Name), obtained from your service provider, into the APN field.
8. Enter the Primary and Secondary DNS addresses (obtained from your service provider)
into the appropriate fields, or if you have been instructed by your service provider to have
the Modem Manager automatically search for the DNS addresses, select the Obtain DNS
server addresses automatically check box.
9. Click Next to continue. The Enter User Information dialog box will be displayed, shown in
Figure 45.
Figure 45 Enter User Information dialog box
10. If your service provider requires you to enter a user name and password, select A user
name and password are required by my carrier, and enter the User name and Password
(obtained from your service provider) into the appropriate fields.
If your service provider does not require a user name or password, leave all fields empty.
11. Click Next to continue. The Default Connection dialog box will be displayed, shown in
Figure 46.
Figure 46 Default Connection dialog box
12. Select Yes to make the new network connection profile your default connection, or No to
keep the existing default connection profile settings.
13. Click Finish to add the new network connection profile to the Connection Profile list pane.