User's Manual

Using the Modem Manager 39
Manual Revision 1.0 P/N 90023333
Connecting to the Network
To connect to the network, open the Modem Manager main window, and click Connect. The
modem will then attempt to register and connect to the network using the information provided in
the default connection profile. See Figure 62.
Figure 62 Connect button
Once the Modem Manager has successfully registered and connected to the network, the
Current Status field will display the message Connected.
If you have not specified a connection profile as your default setting, the Modem Manager
requires you to select the desired profile from the Connection Selection window, shown in
Figure 63.
Figure 63 Connection Selection window
For more information on connecting to the network using an alternate connection profile, see
Using Multiple Connection Profiles on page 40.
Note:
The Modem Manager must have access to a connection profile in order to connect to the
network. If you have not been provided with a pre-defined connection profile, or have not
created one previously, see Creating a New Connection Profile on page 42 for more infor-
mation.