User's Manual

45
Internet Settings Page
Connection Options
Auto-connect enable
Auto-connect allows your MiFi device to connect to your provider’s network automatically
whenever it is turned on.
Allow Guest users to establish the Internet connection
Check this box to have the Connect button appear on the Landing page. This also enables Guest
users access to unlock the SIM PIN if prompted during a connection.
Event Log Enable
Check this box to enable the Event Log.
Network Options
• WWAN Mode — Select 3G Only, 4G Only, 3G Preferred, or 4G Preferred
• Failover Wait Time — Type in the desired number of seconds
• Switchback Wait Time — Type in the desired number of seconds
• Roaming — Select Automatic or Home Network Only. You can allow international roaming by
marking the check box.
• Home Network — Your MiFi device only auto-connects to the home network when it is
on.
• Automatic — Your MiFi device connects to any available network when it is on.
IMPORTANT Additional charges may apply for international roaming. Please consult your
network operator.
➤ After selecting your network options settings, click Apply.