User's Manual

6
Install and Charge Battery
Before connecting the MiFi device to your computer for the rst time, you must install and charge
the battery.
The battery door cover on your MiFi device snaps open and closed. No tools are required to remove
or install the battery door. Using any type of tools could result in damage to the device and to the
battery. If excessive force appears necessary to move the door or remove the battery, please return
the MiFi device to your carrier or where you purchased your MiFi device.
IMPORTANT The battery must be fully charged (for a minimum of four hours) before using
your MiFi device the first time. After the initial use and set up, you may use the device with the
battery, AC mains charger, car charger, or USB power.
➊ Hold your MiFi device rmly with one hand and the battery door side up.
➋ Using the thumb of your free hand, push the release button on the end of the MiFi device.
4082 PHOTO
DEVICE BACK
HOLDING w/ONE
HAND/THUMB ON
BUTTON FPO
IMPORTANT When installing or replacing a battery, ensure that the MiFi device is not
connected to your computer with the USB cable or a USB power supply. Before using the MiFi
device, review the Battery Tips and Safety disposal instructions in Proper Battery Use and Disposal
on page 75
➌ While using normal thumb pressure on the release button with one hand, lift the battery
door away from the MiFi device with your other hand.
4082 PHOTO
DEVICE BACK
REMOVING BATTERY
COVER FPO