User's Manual

32
TCP/IP
• IP Address — The IP address for MiFi4620L.
• Subnet Mask — The subnet mask network setting for MiFi4620L. The default value
255.255.255.0 is standard for small (class “C”) networks. If you change the LAN IP Address,
ensure you use the correct Subnet Mask for the IP address range containing the LAN IP
address.
• MAC Address — The Media Access Controller (MAC) or physical address for MiFi4620L.
• DHCP Address Range — The range of IP addresses reserved for use by MiFi4620L’s DHCP
server table. If a device with a static IP address wants to connect to MiFi4620L’s network, the
static IP should be outside of the DHCP address range. Most devices do not have a static IP.
Connected Devices
• IP Address — The IP address for the connected device.
• IP Type — This can be DHCP if the IP address came from MiFi4620L, or ARP if the ARP
protocol was used.
• Hostname — The network name for the connected device (if available).
• MAC Address — The MAC address for the connected device.
NOTE The MAC address on the Windows operating system is called the Physical Address.
• Date/Time — The date/time the device was detected by the network.
Buttons
• Refresh — Click this button to re-load the LAN screen to show changes to the list of
connected devices, such as a device that recently joined or left the network.
• Apply — Click this button to apply any changes you made to MiFi4620L’s IP address or
subnet mask.
IMPORTANT Changing MiFi 4620L’s IP address causes the device to re-start. This stops all Wi-Fi
and Internet connections. You must re-connect your computer to MiFi 4620L using the new IP
address.
Be sure to write down the new IP address before you finish changing the profile.