Enfora Wi-Fi Adapter for Treo 600/650 Smartphone Users Manual Version 1.0 Enfora L.P. 661 E. 18th Street Plano Texas 75074 www.enfora.
Copyright Statement Copyright 2004 by Enfora L.P. All rights reserved. No portion of this document may be copied, photocopied, reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Enfora L.P. © 2004 Enfora, L.P. All rights reserved. Disclaimer Enfora L.P.
Safety Information for Wireless Handheld Devices The equipment certifications appropriate to your device are marked on the device and product specific information. The use of the equipment is subject to the following conditions: FCC COMPLIANCE STATEMENT This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Use the following or equivalent certified Power Supply. Make: PHIHONG, Model PSA11R-050 Rated Input: 100-240Vac, 0.5A, 50-60hz, DC Output: 5V DC, 2.0A Limited Power Source.
General Safety Instructions • Check if all peripherals are properly connected before turning on any equipment. • Make sure to disconnect the power plug from the power source before installing or removing peripherals. • Always hold the product with dry hands. Droplets of water may cause it to short circuit and damage to the product. • Use the product only under a dry environment. Humid places are not appropriate for the product. • DO NOT use the product in a damp environment.
Package Contents Check the contents of the package. The following items should be included. If there is any item that is damaged or missing, please contact your dealer immediately.
Appearance Enfora Wi-Fi Adapter for Treo Smartphone Lock Release Button Network/ Battery Status LED Power On/Off Button Treo Smartphone Headphone Jack Lock Release Button Wi-Fi Adapter DC Power Input Treo Smartphone Headphone Jack WLN150x Wi-Fi Adapter vii
Network & Battery Status LED Description LED Color OFF Green Green Green Yellow Yellow LED Status OFF Short Blink Solid Long Blink Short Blink Solid Connection Status Unit Not Powered ON Attempting to Register on Wi-Fi Network Register on Wi-Fi Network Passing Data on Wi-Fi network Battery Low (Charge Battery) Device Powered on. Not Registered Installing the Treo Smartphone To install a Smartphone: 1. Slide your Treo 600/650 Smartphone into the Enfora Wi-Fi Adapter.
Battery Operations Prior to using the Enfora Wi-Fi Adapter, charge the new battery for a minimum of 2 hours to obtain a full charge. The Enfora Wi-Fi Adapter derives its power from a self-contained battery pack to ensure there is no battery drain on the handheld device. The Enfora Wi-Fi Adapter will also charge your Treo 600/650 Smartphone if the Treo 600/650 is placed in the Enfora Wi-Fi Adapter. The Enfora Wi-Fi Adapter WILL NOT act as a spare battery for the Treo Smartphone.
2. The first time you use the Enfora Wi-Fi Adapter you will need to configure the Wi-Fi Adapter. If you know your Network Name (SSID) select Add and then go to step 6. If you do not know the Network Name (SSID) select Scan to search for any available Access Points. Select Add if you know your Network Name Scan for Access Points 3. If there are any available Access Points in range of the Enfora Wi-Fi Adapter , the Network Name will be displayed in the Network List window.
Create Profile Network Name Selected 5. Create a unique name for this profile. The profile name should be different than the Network Name. The Network Name that you selected form the Scan list will appear in the Network Name field. Next skip to step 7. Profile and Network Name 6. If you know your Network Name first create a name for your profile. The profile name should be different than the Network Name. Any is the default Network Name. Highlight Any and enter your Network Name.
Infrastructure is the default Network Mode 8. If WEP is enabled on your network please contact your network administrator for the correct WEP settings. Hex is the default setting for the network key. If your Access Point uses ASCII select the box in front of ASCII. Select OK to save your settings. Check if your Access Point uses ASCII 9. Select OK from the Profile Settings window to return to the main Manager window. 10. In the Manager window check the status of the Enfora Wi-Fi Adapter .
11. Once the Enfora Wi-Fi Adapter is configured you do not need to use the Manager to make a wireless connection. Simply select your web browser and the wireless connection will be started. Remember to power on the Enfora Wi-Fi Adapter before selecting your web browser.
To find out your Network Settings click on the preference button. Then select Network Information. 1.
The Enfora Wi-Fi Adapter has a Power Save setting. By default the Power Save option is Enabled. To Disable Power Save open the Enfora Wi-Fi Adapter Manager and select Device Information from the options menu. From the Device Information window select the drop down box to Enable or Disable the Power Save option. Restore Default settings The Enfora Wi-Fi Adapter can be set back to the factory defaults. Any saved Profiles will be erased.
CONDITIONS OF THIS AGREEMENT, DO NOT USE THE SOFTWARE. USING ANY PART OF THE SOFTWARE INDICATES THAT YOU ACCEPT THESE TERMS. Software products included with this product that are not Enfora products are licensed to you by the software provider. Refer to the license contained in the provider’s product for the terms of use before using such products.
