User's Manual Part 1

PC Software and Firmware Chapter 6
OEMV Family Installation and Operation User Manual Rev 5B 107
Table 21: NovAtel Logs for Rinex Conversion
6.3.2 Convert Command Line Switches
Convert4 supports several command-line switches to facilitate batch processing. To access its
Command Line Arguments window, open a command prompt window (select Accessories |
Command Prompt from the Start menu). Change directory (cd) to the directory on your hard drive that
Convert4 is stored. Type the following: convert4 -h
The Convert4 Command Line Arguments window appears as shown in Figure 34.
Figure 34: Convert Command Line Arguments
NovAtel OEMV Family Log Recommended Trigger
RANGEA/B, or
RANGECMPA/B
ontime 15
BESTPOSA/B, or
PSRPOSA/B, or
RTKPOSA/B, or
MARKPOSA/B
once
IONUTCA/B onchanged
RAWEPHEMA/B onchanged
GLORAWEPHEMA/B onchanged
VERSIONA/B
a
a. Information from this log overrides data entered into the Receiver
Number, Type and Version fields using the OBS file button of the
RINEX Headers section, see Figure 33 on Page 105
once
SITEDEFA/B
b
b. Available on DL-V3 receivers, refer to the DL-V3 Firmware
User Manual. Information from this log overrides data
entered into the Marker Name, Marker Number, Antenna
Type and Antenna Delta H fields using the OBS file button of
the RINEX Headers section
once