User's Manual Part 1

Notice
OEMV Family Installation and Operation User Manual Rev 5B 11
CE NOTICE
The enclosures carry the CE mark.
WARNING: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
"Hereby, NovAtel Inc. declares that this DL-V3, ProPak-V3, FlexPak-V2, FlexPak-V1G, FlexPak-V1
and SMART-V1 is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC."
SMART-V1 Power Warning
When connecting power to the SMART-V1 (1), it is recommended that you use a battery source (3).
In this case, it is important that you tie together the bare wires (2) tagged as GND2 (brown) and GND
(black) to the battery’s negative terminal. Tie the bare wires tagged as PWR (red) and PWR2 (orange)
to the battery’s positive terminal.
WARNING: If you do not use a battery, you must tie together the bare wires tagged as GND2
(brown), GND (black) and DIGGND (green) to the DC power supply’s negative
ground connector.
Failure to tie the appropriate grounds, as explained in this section, may result
in your SMART-V1 becoming permanently damaged and void your warranty.
1
+
-
3
C
O
M
1
C
O
M
2
PWR
(red)
PWR2
(orange)
T
I
M
E
M
A
R
K
(
b
l
u
e
)
R
e
s
e
r
v
e
d
(
y
e
l
l
o
w
)
D
I
G
G
N
D
(
g
r
e
e
n
)
GND2
(brown)
GND
(black)
2
DC
AC