User's Manual Part 1

26 OEMV Family Installation and Operation User Manual Rev 5B
Chapter 1 Introduction
1.3.1 ProPak-V3 and DL-V3
The features of the OEMV-3 are available within the DL-V3 and ProPak-V3. These enclosures, see
Figure 6 below, offer GNSS integrators an effective, self-contained system for indoor applications
while also providing a rugged, water, shock, and vibration resistant housing for outdoor applications.
The DL-V3 is also capable of data logging (DL) using the removable Compact Flash (CF) card.
Figure 6: DL-V3 (top) and ProPak-V3 (bottom) Enclosures
DL-V3
The DL-V3 also offers the following features:
• Rugged waterproof aluminum enclosure with removable compact flash
• Auxiliary status and synchronization signals
• GNSS antenna and power ports
• Bluetooth interaction between the receiver and a user-supplied Bluetooth-equipped
laptop/PDA/PC through COM3. Bluetooth is the default on COM3 but Ethernet
capability is configurable. See also Ethernet Configuration starting on Page 189.
• External oscillator, USB, and Ethernet dedicated connectors
• LED indicators to provide power status, communication status, number of GPS satellites,
CF memory, position mode, occupation time, Bluetooth status and Ethernet status
The following accessories are included with the DL-V3:
• Compact Flash Card for data storage
•Cables: