User's Manual Part 1

50 OEMV Family Installation and Operation User Manual Rev 5B

Chapter 3 Installation and Set Up

Positioning Mode

Which LEDs are glowing, or blinking, or off, and their colors, correspond to the DL-V3’s

current positioning mode. Table 14 below shows the available positioning modes and their

corresponding LEDs where the first LED to the left is #1, as you look at the DL-V3, and #5 is

the furthest to the right. If the table cell shows the name of a color (red, amber or green) with a

solid background, that LED is glowing solidly. The table cells that appear dim, behind their

color name, indicate that the LED is flashing that color. The LED may also be off.

Table 14: Positioning Mode LEDs

Position Mode Position Mode Detail 1 2 3 4 5

Single Point

Autonomous (fixed height)

Amber Off Off Off Off

Autonomous (3D)

Amber Off Off Off Off

Differential GPS

SBAS

Off Green Off Off Off

CDGPS

Off Off Green Off Off

DGPS

Off Green Green Off Off

OmniSTAR

VBS (searching)

Amber Green Off Off Off

VBS (pulling in)

Amber Green Off Off Off

VBS

Amber Green Off Off Off

XP (searching)

Amber Off Green Off Off

XP (pulling in)

Amber Off Green Off Off

HP (searching)

Amber Green Green Off Off

HP (pulling in)

Amber Green Green Off Off

RTK

Float (RT-20, unconverged)

Amber Off Off Green Off

Float (RT-20)

Amber Off Off Green Off

Fixed (RT-2, unconverged)

Amber Off Off Off Green

Fixed (RT-2)

Amber Off Off Off Green