User's Manual Part 1

56 OEMV Family Installation and Operation User Manual Rev 5B
Chapter 4 Operation
Before operating the receiver for the first time, please ensure that you have followed the installation
instructions in Chapter 3, Installation and Set Up on Page 33. The following instructions are based on
a configuration such as that shown in Figure 15 below. It is assumed that a personal computer is used
during the initial operation and testing for greater ease and versatility.
Figure 15: Typical Operational Configuration
Reference Description Reference Description
1 OEMV Card 10 Power Input
2 OEM Enclosure 11 User-Supplied Base Radio
3 NovAtel GNSS Antenna 12 Data Logger or Rover
4 GPS Signal (RF Cable) 13 External DC Power Source
5 COM1 Link 14 Laptop or PC with NovAtel
6 COM2 Link USB drivers installed
7 USB Link 15 External Oscillator
8 COM3 Link 16 PC or Base Station
9 External Oscillator Signal
 See also Figure 16 on Page 60 for a base/rover example.
1
2
3
4
5
6
7
8
9
12
14
15
16
10
11
13