User's Manual Part 2

126 OEMV Family Installation and Operation User Manual Rev 5B
Chapter 8 Troubleshooting
8.1 Examining the RXSTATUS Log
The RXSTATUS log provides detailed status information about your receiver and can be used to
diagnose problems. Please refer to the OEMV Firmware Reference Manual for details on this log and
on how to read the receiver error word and status word. Tables 23 and 24 on pages 126 to 128 give
you actions to take when your receiver has an error flag in either of these words.
Table 23: Resolving a Receiver Error Word
Bit Set Action to Resolve
0 Issue a FRESET command
1 Issue a FRESET command
2 Issue a FRESET command
4 Contact Customer Service as described on Page 18
5 Check the VERSION log
6 Issue a FRESET command
7 See Section 3.1.3, Power Supply Requirements, Page 34
8 Issue a NVMRESTORE command
9 Check temperature ranges in the ENVIRONMENTAL table
sections of Appendix A, Technical Specifications starting on
Page 129
10 Contact Customer Service as described on Page 18
11
12
13
14
15 Move the receiver away from any possible jamming sources