User's Manual Part 2

152 OEMV Family Installation and Operation User Manual Rev 5B
Appendix A Technical Specifications
Table 32: OEMV-3 Strobe Specifications
Strobes
Default
Behavior
Input/
Output
Factory Default
Comment
a
STATUS_RED Dedicated pin Output Active high Status output which is high, or
pulses, to indicate that the OEMV-3
card is not working properly.
b
STATUS_GREEN Dedicated pin Output Active high Status output which pulses to
indicate that the OEMV-3 card is
working properly.
b
a. The commands and logs shown in capital letters (for example, MARKCONTROL) are discussed
in further detail in the OEMV Family Firmware Reference Manual.
b. See also Section 7.6, Status LEDs starting on Page 122 of this manual.
Strobe Sym Min Typ Max Units Conditions
Event1 (Mark 1)
Event2 (Mark2)
PPS
V
IL
0.8 V VDD = 3.3 V; 85°C
V
IH
2.0 V VDD = 3.3 V; 85°C
PV
MSR
VARF
ERROR
STATUS_RED
STATUS_GREEN
RESETOUT
V
OL
0.4 V VDD = 3.3 V; 85°C
V
OH
3.0 V VDD = 3.3 V; 85°C
RESETIN
V
IL
0.8 V VDD = 3.3 V; 85°C
V
IH
2.3 V VDD = 3.3 V; 85°C