User's Manual Part 2

156 OEMV Family Installation and Operation User Manual Rev 5B
Appendix A Technical Specifications
A.6 DL-V3
INPUT/OUTPUT CONNECTORS
Antenna Input TNC female jack, 50 Ω nominal impedance
+4.75 to +5.10 V DC, 100 mA max
(output from DL-V3 to antenna/LNA)
PWR 4-pin LEMO connector
+9 to +28 V DC at 3.5 W (typical while logging)
a
a. When tracking GPS satellites
COM1
COM2
COM3
AUX
I/O
OSC
DB9P connector
DB9P connector
Bluetooth v1.1 interface or Ethernet
b
DB9P connector
DB9S connector
BNC connector (external oscillator)
b. The DL-V3 is Bluetooth ready by default. COM3 may be configured for Ethernet but
only one communication mode at a time can be used on COM3. Ethernet usage also
requires a change of cable. See also the APPCONTROL command in the DL-V3
Firmware Reference Manual and Appendix C, Ethernet Configuration on Page 189 of
this manual.
PHYSICAL
Size 185 x 163 x 76 mm
Weight 1.3 kg maximum (including OEMV-3 card)
ENVIRONMENTAL
Operating Temperature -40°C to +75°C
Storage Temperature -45°C to +95°C
Humidity Not to exceed 95% non-condensing